Specifications
| Hotplate Dims. | : 180 x 180 mm |
| Temp. Range | : Max. 400 oC |
| Stirring Speed | : Max. 1500 rpm |
| Control | : Fine PWM Heat, Stepless Speed Control |
| Safety | : Over-Temperature Cut-Off |
| : Over Current Cut-Off | |
| Material | : Hotplate – Aluminum /w Ceramic Coating |
| : Body – Aluminum Casting /w Epoxy Powder Coating | |
| Electric | : 230±10% VAC 50/60Hz 1-Phase |
| Plug config. | : CEE 7/7 Schuko |
Models
| Art No. | JSHS-18A | ||
| Dimensions | Hotplate | W180 x D180 mm | |
| Overall | W180 x D330 x H110 mm | ||
| Temperature Range | Max. 400 oC | ||
| Speed Range | Max. 1,500 rpm | ||
| Usable Magnetic Bar | Max. 50 mm in length | ||
| Control | Fine PWM Heat Control | ||
| Stepless Speed Control | |||
| Independent ON/OFF Switch | |||
| Heater Capacity | 620 Watt | ||
| Motor | Brushless Shade Motor | ||
| Safety | Over Temp. Cut-Off | ||
| Over Current Cut-Off | |||
| Material | Hotplate | Aluminum with ceramic coating | |
| Body | Aluminum casting with epoxy powder coating | ||
| Base | Engineering Plastic | ||
| Power Rating | 650 watt, 3.0 amps | ||
| Electrical Requirement | 230 VAC~, 50Hz, 1-Phase or 230 VAC~, 60Hz, 1-Phase | ||
| Power Plug | CEE 7/7 Schuko European Standard or BS1363 | ||
Features
| Controller |
| Easy-to-use analog PWM heat and stepless speed control
|
| Construction |
| 180 x 180 mm sized durable, chemical and scratch resistant ceramic coated aluminum top plate.
Thermal insulation between top plate and body ensure durability and long shelf life Low profile and functional design of main body provide safe use and chemical spill protection Main body made by aluminum casting with durable epoxy powder coating resistant to most of the chemical and thermal damage Base plate made by engineering plastic provides durability and resistant to chemical and fumes Suction-Cup type Feet provide strong and stable attachment on the table surface
|
| Performance |
| Temperature control max. 400 oC
Stirring speed max. 1,500 rpm
|
| Convenience |
| Screw type attachment hole on the body for optional stand rod
|
| Safety |
| OVER TEMP. PROTECTION
OVER CURRENT CUT-OFF : Fuse
|
Ordering Information
| Art No. | Descriptions | Elec. Req. | Net Wt. | Ship Wt. |
| JSHS-18A1 | Analog Hotplate Magnetic Stirrer | 230 VAC 50 Hz | 2.9 kg | 3.7 kg |
| JSHS-18A2 | Analog Hotplate Magnetic Stirrer | 230 VAC 60 Hz | 2.9 kg | 3.7 kg |
| Optional Accessories | |
| Art No. | Descriptions |
| PHA-03S | Stand Rod, Stainless Steel |
| PHA-04H | SET of Temperature Probe Holder, Clamp, Wire Clip x 2 ea |
